Whitby, Ontario / Permit cost

What does a heating and ventilation permit cost?

See the published permit fee information BuildRules has verified for a heating and ventilation project in Whitby, Ontario, with the source and limits visible.

Need the permit rules rather than just the fee? Read Whitby heating and ventilation permit requirements and zoning checks

Check this for your address
Focused project answerLast verified Nov 9, 2026
Published fee information

Whitby 2026 Schedule N: BGP-79 mechanical ductwork-only $1,172 flat; BGP-81 geothermal or earth energy $1,035 flat; BGP-82 system add-ons including some rooftop units $1,781 flat (no HST). Other HVAC classes may be assessed under larger alteration permits; do not apply one price to all furnace work.

Use this as a municipal-fee reference, not as the total project budget. Design, engineering, related applications and construction costs are separate.

Scope before arithmetic

Make sure the fee belongs to your project.

The Town's building permit instructions include plumbing, drains and heating systems among regulated categories. New duct configurations, heating-source changes, fuel equipment, rooftop equipment, geothermal and commercial ventilation can require different drawings, designer qualifications and inspections. The standard Residential Alterations / Additions application uses E-Portal or paper, while commercial/ICI submissions may use email. Electrical Safety Authority and licensed fuel/gas approvals remain separate.

Permit decisionHeating system work needs classification; fees vary by HVAC type

The Town's building permit instructions include plumbing, drains and heating systems among regulated categories. New duct configurations, heating-source changes, fuel equipment, rooftop equipment, geothermal and commercial ventilation can require different drawings, designer qualifications and inspections. The standard Residential Alterations / Additions application uses E-Portal or paper, while commercial/ICI submissions may use email. Electrical Safety Authority and licensed fuel/gas approvals remain separate.

Application route, if a permit appliesIdentify Mechanical, geothermal or Residential Alterations permit

Identify whether scope is duct-only, geothermal, rooftop add-on, heating system conversion or replacement. Ask Whitby Building Services for proper mechanical or residential alteration permit category. Prepare mechanical and structural drawings, equipment specifications, and qualified designer forms as applicable. Budget BGP-79/81/82 only when their defined scope applies; confirm invoice. Obtain municipal and separate electrical/gas approvals and inspections before use.

Local checks and submission documents2026 duct-only $1,172, geothermal $1,035, add-on $1,781

Existing and proposed heating source/fuel and equipment capacity; HVAC duct/vent changes, exhaust and controls; Mechanical/heat-load calculations or drawings when required; Roof loading if equipment rooftop, or geothermal details if applicable; Other gas, fuel and ESA electrical approval requirements

Official sources behind this page

Permit decisionHeating system work needs classification; fees vary by HVAC type

The Town's building permit instructions include plumbing, drains and heating systems among regulated categories. New duct configurations, heating-source changes, fuel equipment, rooftop equipment, geothermal and commercial ventilation can require different drawings, designer qualifications and inspections. The standard Residential Alterations / Additions application uses E-Portal or paper, while commercial/ICI submissions may use email. Electrical Safety Authority and licensed fuel/gas approvals remain separate.

Official sourceTown of WhitbyBuilding Permits: applications, mandatory documents, E-Portal submission by type · 2026 permit categories, applicable law checklist, submissions, inspections
Verified2026-11-09Open proof
Application route, if a permit appliesIdentify Mechanical, geothermal or Residential Alterations permit

Identify whether scope is duct-only, geothermal, rooftop add-on, heating system conversion or replacement. Ask Whitby Building Services for proper mechanical or residential alteration permit category. Prepare mechanical and structural drawings, equipment specifications, and qualified designer forms as applicable. Budget BGP-79/81/82 only when their defined scope applies; confirm invoice. Obtain municipal and separate electrical/gas approvals and inspections before use.

Official sourceTown of WhitbyBuilding Permits: applications, mandatory documents, E-Portal submission by type · 2026 permit categories, applicable law checklist, submissions, inspections
Verified2026-11-09Open proof
Local checks and submission documents2026 duct-only $1,172, geothermal $1,035, add-on $1,781

Existing and proposed heating source/fuel and equipment capacity; HVAC duct/vent changes, exhaust and controls; Mechanical/heat-load calculations or drawings when required; Roof loading if equipment rooftop, or geothermal details if applicable; Other gas, fuel and ESA electrical approval requirements

Official sourceTown of WhitbySchedule N to By-law 7220-17: 2026 Building Services Fees · BGP-73 below grade entrance $305 flat, BGP-55 $305 minimum, January 1 2026
Verified2026-11-09Open proof
Mechanical fee categories differDuctwork-only $1,172 is not a universal furnace replacement fee

Whitby Schedule N BGP-79, 81 and 82 lists distinct mechanical project types. Proper classification and additional electrical/gas approvals remain separate.

Official sourceTown of WhitbySchedule N to By-law 7220-17: 2026 Building Services Fees · BGP-73 below grade entrance $305 flat, BGP-55 $305 minimum, January 1 2026
Verified2026-11-09Open proof

Need the full project answer?

The main guide keeps the permit trigger, zoning questions, documents, fees, timing and next steps together.

Open the heating and ventilation guide