London, Ontario / Permit cost

What does a heating and ventilation permit cost?

See the published permit fee information BuildRules has verified for a heating and ventilation project in London, Ontario, with the source and limits visible.

Need the permit rules rather than just the fee? Read London heating and ventilation permit requirements and zoning checks

Check this for your address
Focused project answerLast verified Nov 9, 2026
Published fee information

London B-7 March 2026 Schedule A 3.6.1: standalone HVAC on single/detached/semi residential units $260.37 flat; on other Group C, Group A/B/D/E/F, rate $2.46 per m² subject to applicable minimum. Make-up-air units or rooftop units may add $260.37. Confirm whether the exact scope is exempt or an alteration permit.

Use this as a municipal-fee reference, not as the total project budget. Design, engineering, related applications and construction costs are separate.

Scope before arithmetic

Make sure the fee belongs to your project.

The City's permit trigger list distinguishes a new HVAC system, changes to furnace ducts and rooftop replacement from an exempt higher-efficiency replacement furnace. Do not treat every equipment swap or fuel change as exempt. London B-7 Schedule A 3.6.1 prices standalone Group C single/detached/semi HVAC at $260.37; other buildings use a $2.46/m² service index, and make-up-air/rooftop units can add a separate $260.37. Electrical Safety Authority and fuel/gas compliance are different from City building permission.

Permit decisionHVAC and duct alterations require review; limited furnace exemption

London requires a permit for heating/air conditioning systems and altered furnace ducts. Its no-permit list includes higher-efficiency furnace replacement, but the exemption does not automatically cover altered ducts or fuel change.

Application route, if a permit appliesIdentify equipment, duct changes and mechanical application class

Distinguish a higher-efficiency furnace equipment replacement from changes in furnace ducts, heat source or roof-mounted units. Identify the exact residential or non-residential fee classification. Document equipment, duct, venting and mechanical changes and designer qualifications. Submit the City building application where required and check separate ESA, fuel and utility work. Arrange permit-listed inspections and preserve approved drawings at the site.

Local checks and submission documents2026 standalone residential HVAC fee $260.37; some extra charges

Existing and proposed equipment type, fuel, size and capacity; Whether ducts, vents, combustion air or distribution changes; Rooftop load and attachment details, if relevant; Heat-loss/gain and other mechanical design appropriate to work; Confirm separate ESA and fuel safety permissions

Official sources behind this page

Permit decisionHVAC and duct alterations require review; limited furnace exemption

London requires a permit for heating/air conditioning systems and altered furnace ducts. Its no-permit list includes higher-efficiency furnace replacement, but the exemption does not automatically cover altered ducts or fuel change.

Official sourceCity of LondonBefore you apply for a building permit · Residential permit triggers, exemptions and review timelines
Verified2026-11-09Open proof
Application route, if a permit appliesIdentify equipment, duct changes and mechanical application class

Distinguish a higher-efficiency furnace equipment replacement from changes in furnace ducts, heat source or roof-mounted units. Identify the exact residential or non-residential fee classification. Document equipment, duct, venting and mechanical changes and designer qualifications. Submit the City building application where required and check separate ESA, fuel and utility work. Arrange permit-listed inspections and preserve approved drawings at the site.

Official sourceCity of LondonBefore you apply for a building permit · Residential permit triggers, exemptions and review timelines
Verified2026-11-09Open proof
Local checks and submission documents2026 standalone residential HVAC fee $260.37; some extra charges

Existing and proposed equipment type, fuel, size and capacity; Whether ducts, vents, combustion air or distribution changes; Rooftop load and attachment details, if relevant; Heat-loss/gain and other mechanical design appropriate to work; Confirm separate ESA and fuel safety permissions

Official sourceCity of LondonBuilding By-law B-7, Schedule A, effective March 1 2026 through February 28 2027 · 2026 fee schedule, residential alterations, demolition, structures, mechanical and plumbing
Verified2026-11-09Open proof
Furnace efficiency exceptionA replacement furnace can be exempt, but changes to ducts and HVAC systems are not

London lists a higher-efficiency replacement furnace as no-permit work. Its permit-required list separately names furnace duct alterations, HVAC systems and rooftop equipment, so classify the full scope.

Official sourceCity of LondonBefore you apply for a building permit · Residential permit triggers, exemptions and review timelines
Verified2026-11-09Open proof

Need the full project answer?

The main guide keeps the permit trigger, zoning questions, documents, fees, timing and next steps together.

Open the heating and ventilation guide