Scope before arithmetic
Make sure the fee belongs to your project.
London's homeowner guide says detached accessory structures generally belong in an interior side or rear yard, must be at least 0.6 m from side/rear boundaries and normally cannot exceed 4 m height. A taller building may be possible up to 6 m with increased setback. The 10% combined accessory-structure lot-coverage cap applies alongside overall zoning lot coverage. Small structures may have a setback exception, not a blanket garage permit exemption. Confirm size, house type, plumbing, driveway access and grading.
London requires a building permit for detached garages and applies combined accessory lot coverage, yard, height and setback restrictions; a shed-specific exemption does not automatically approve a garage.
Confirm whether the project is detached garage, attached carport or a small storage shed; different rules can apply. Calculate combined accessory building coverage; the City lists a 10% residential-lot maximum. Verify interior/rear-yard location, 0.6 m minimum setbacks and height rule or approved alternatives. Prepare foundation/framing/elevation plans and site survey, and identify plumbing. Apply for the appropriate permit, confirm $260.37 or $409.14 fee plus any plumbing surcharge, and book the listed inspections.
Lot survey or site plan with boundary distances and building footprint; Combined lot coverage of existing and proposed accessory structures; Floor area, building height, roof/framing, foundations and use; Existing house type, attachment and whether plumbing is proposed; Driveway and lot grading/drainage plan where applicable
Official sources behind this page
London requires a building permit for detached garages and applies combined accessory lot coverage, yard, height and setback restrictions; a shed-specific exemption does not automatically approve a garage.
Confirm whether the project is detached garage, attached carport or a small storage shed; different rules can apply. Calculate combined accessory building coverage; the City lists a 10% residential-lot maximum. Verify interior/rear-yard location, 0.6 m minimum setbacks and height rule or approved alternatives. Prepare foundation/framing/elevation plans and site survey, and identify plumbing. Apply for the appropriate permit, confirm $260.37 or $409.14 fee plus any plumbing surcharge, and book the listed inspections.
Lot survey or site plan with boundary distances and building footprint; Combined lot coverage of existing and proposed accessory structures; Floor area, building height, roof/framing, foundations and use; Existing house type, attachment and whether plumbing is proposed; Driveway and lot grading/drainage plan where applicable
The City's published timelines specify 10 business days for detached garages serving houses, measured from a complete application. Do not apply this timeframe to other garage types; corrections, approvals and final issuance may take longer.
The City's common homeowner guidance sets combined accessory-structure area at no more than 10% of lot area in residential zones, ordinary 0.6 m side/rear setback and 4 m height rule, with property-specific exceptions.
Need the full project answer?
The main guide keeps the permit trigger, zoning questions, documents, fees, timing and next steps together.
Open the garage / carport guide